Should You Drop Start A Chainsaw

Chainsaws have been around for a long time and have been used for many different tasks, such as cutting trees or logs. But what are the pros and cons of dropping start chainsaw usage?

There are a lot of reasons why people might choose to drop start chainsaw usage. One reason is that it reduces the stress on your back and shoulders when you’re sawing. Another reason is that it’s easier to control a chainsaw when you’re starting it from the ground up.

But is it really a better option than starting the chainsaw from the handle?

We will discuss all these pros and cons in this article so that you can make an informed decision about whether or not to drop start your chainsaw!

Should You Drop Start A Chainsaw

There are a few things to consider before drop starting a chainsaw. For one, there is the potential for accidents. In fact, many manufacturers advise against drop starting due to the risks involved. When you drop start a chainsaw, the bar usually gets tipped towards the left leg. This can pose a serious threat of having your leg cut if the saw starts up.

Another thing to keep in mind is that drop starting a chainsaw can put a lot of strain on the engine. This is because when you drop start, the engine has to work harder to get the saw going. As a result, this can lead to increased wear and tear on the engine, which can shorten its lifespan.

So, should you drop start a chainsaw? Ultimately, it depends on your own personal level of risk tolerance. If you’re comfortable with the risks involved, then go ahead and give it a try. But if you’re not comfortable with the risks, then it’s probably best to avoid drop starting altogether.

How To Start A Chainsaw Properly

Before you start your chainsaw, there are a few things you need to do in order to ensure that it is done properly. First, make sure that the area around you is clear of any obstacles or hazards.

This includes making sure that there is nothing close to you that could potentially get caught in the chain, as well as ensuring that there are no low-hanging branches or other obstacles above you.

Second, check to see that the chain is properly tensioned and oiled. If the chain is too loose, it could come off of the saw while you are using it; if it is too tight, it could break.

Once you have checked these things, you are ready to start your chainsaw. Begin by holding the saw with both hands, placing your left hand on the rear handle and your right hand on the front handle.

Next, pull the choke lever (located on the top of the saw near the right handle) all the way out. Then, place your right foot on the front handle and push down with your left hand until the saw starts.

Once the engine has started, slowly release the choke lever; if you do not do this, the engine will stall. You are now ready to begin cutting!


Although it may be tempting to drop start your chainsaw, it is not advised by the manufacturers. This is because there is a potential for accidents which could cause serious injury.

If you do decide to drop start your chainsaw, be sure to take extra safety precautions and be aware of the risks involved.

Other Articles